Config pou partage de calcul

Tout ce qui se rapporte à l'informatique en général
nico8313
Modérateur Global
Modérateur Global
Messages : 2228
Enregistré le : 29 mai 2008, 14:59
Localisation : VAR
Contact :

Re : Config pou partage de calcul

Message par nico8313 » 02 novembre 2010, 17:36

Sur renderfarm.fi  on est quelques Libristes au top de l'AF !  :thomas:

http://www.renderfarm.fi/team_members.p ... avg_credit



EDIT :
Ah zut !!! déjà plus une seule WU  :furax:
http://renderfarm.fi/status.php
Modifié en dernier par nico8313 le 02 novembre 2010, 17:39, modifié 1 fois.

Avatar du membre
Elgrande71
Administrateur
Administrateur
Messages : 1745
Enregistré le : 29 février 2008, 10:24
Localisation : Le Creusot
Contact :

Re : Re : Config pou partage de calcul

Message par Elgrande71 » 02 novembre 2010, 18:01

nico8313 a écrit : Sur renderfarm.fi  on est quelques Libristes au top de l'AF !  :thomas:

http://www.renderfarm.fi/team_members.p ... avg_credit



EDIT :
Ah zut !!! déjà plus une seule WU  :furax:
http://renderfarm.fi/status.php
Bravo à nous.  :thomas:
Par contre, il est vrai que les Wus filent à une vitesse.  :run:
Debian - Distribution GNU/Linux de référence
Parabola GNU/Linux - Distribution GNU/Linux Libre
Solus

Patoche
Zone privée MT Libristes
Zone privée MT Libristes
Messages : 51
Enregistré le : 26 septembre 2010, 15:14
Localisation : Montagne(33)
Contact :

Re : Config pou partage de calcul

Message par Patoche » 20 novembre 2010, 11:42

Au secours!!!!!!!!!
Mon ordi a planté.
J'essaie de relancer sur un autre poste,mais rien n'y fait.
J'ai un message d'erreur me parlant d'une incompatibilité de logiciel.
J'utilise Ubuntu 10.04 sur les deux postes.
Dans les deux cas je suis passé par le gestionnaire de paquets pour installer Boinc.
la seule difference,c'est que pross du poste que j'essaie de connecter est en 64 bits,l'autre etait en 32.
Avez vous une idée,je suis bloqué.
Merci d'avance

Avatar du membre
Elgrande71
Administrateur
Administrateur
Messages : 1745
Enregistré le : 29 février 2008, 10:24
Localisation : Le Creusot
Contact :

Re : Re : Config pou partage de calcul

Message par Elgrande71 » 20 novembre 2010, 12:01

Patoche a écrit : Au secours!!!!!!!!!
Mon ordi a planté.
J'essaie de relancer sur un autre poste,mais rien n'y fait.
J'ai un message d'erreur me parlant d'une incompatibilité de logiciel.
J'utilise Ubuntu 10.04 sur les deux postes.
Dans les deux cas je suis passé par le gestionnaire de paquets pour installer Boinc.
la seule difference,c'est que pross du poste que j'essaie de connecter est en 64 bits,l'autre etait en 32.
Avez vous une idée,je suis bloqué.
Merci d'avance
Peux-tu nous rappeler les projets auxquels tu participes ?
Je pense que cela nous aiderais un peu.
Debian - Distribution GNU/Linux de référence
Parabola GNU/Linux - Distribution GNU/Linux Libre
Solus

Patoche
Zone privée MT Libristes
Zone privée MT Libristes
Messages : 51
Enregistré le : 26 septembre 2010, 15:14
Localisation : Montagne(33)
Contact :

Re : Config pou partage de calcul

Message par Patoche » 20 novembre 2010, 13:01

World community grid,j'ai essayé de me connecter sur Milkiway,mais les ">" du pseudo ne sont pas traduites correctement,je ne sais pas si ça me rattacherai à notre team.

Patoche
Zone privée MT Libristes
Zone privée MT Libristes
Messages : 51
Enregistré le : 26 septembre 2010, 15:14
Localisation : Montagne(33)
Contact :

Re : Config pou partage de calcul

Message par Patoche » 20 novembre 2010, 13:23

J'ai réussi à relancer le poste en 32  bits,mais je n'arrive à rien avec le 64 bits.
Modifié en dernier par Patoche le 22 novembre 2010, 17:29, modifié 1 fois.

Avatar du membre
Elgrande71
Administrateur
Administrateur
Messages : 1745
Enregistré le : 29 février 2008, 10:24
Localisation : Le Creusot
Contact :

Re : Re : Config pou partage de calcul

Message par Elgrande71 » 20 novembre 2010, 14:22

Patoche a écrit : J'ai réussi à relancer le poste en  bits,mais je n'arrive à rien avec le bits.
Pourrais-tu afficher le contenu du fichier /var/log/kern.log ou taper dans un terminal dmesg et nous afficher la teneur de celui-ci ?
Debian - Distribution GNU/Linux de référence
Parabola GNU/Linux - Distribution GNU/Linux Libre
Solus

Patoche
Zone privée MT Libristes
Zone privée MT Libristes
Messages : 51
Enregistré le : 26 septembre 2010, 15:14
Localisation : Montagne(33)
Contact :

Re : Config pou partage de calcul

Message par Patoche » 22 novembre 2010, 17:32

Voici ce que j'ai avec la commande dmesg.

0, disabled.
[    0.405001] ACPI: PCI Interrupt Link [LNK4] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.405155] ACPI: PCI Interrupt Link [LNK5] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.405312] ACPI: PCI Interrupt Link [LUBA] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.405467] ACPI: PCI Interrupt Link [LUBB] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.405620] ACPI: PCI Interrupt Link [LMAC] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.405772] ACPI: PCI Interrupt Link [LACI] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.405923] ACPI: PCI Interrupt Link [LMCI] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.406075] ACPI: PCI Interrupt Link [LSMB] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.406227] ACPI: PCI Interrupt Link [LUB2] (IRQs *3 4 5 7 9 10 11 12 14 15)
[    0.406378] ACPI: PCI Interrupt Link [LIDE] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.406543] ACPI: PCI Interrupt Link [LSID] (IRQs 3 4 5 7 9 10 *11 12 14 15)
[    0.406704] ACPI: PCI Interrupt Link [LFID] (IRQs 3 4 *5 7 9 10 11 12 14 15)
[    0.406865] ACPI: PCI Interrupt Link [LPCA] (IRQs 3 4 5 7 9 10 11 12 14 15) *0, disabled.
[    0.407042] ACPI: PCI Interrupt Link [APC1] (IRQs 16) *0
[    0.407213] ACPI: PCI Interrupt Link [APC2] (IRQs 17) *0
[    0.407383] ACPI: PCI Interrupt Link [APC3] (IRQs 18) *0, disabled.
[    0.407554] ACPI: PCI Interrupt Link [APC4] (IRQs 19) *0
[    0.407660] ACPI: PCI Interrupt Link [APC5] (IRQs *16), disabled.
[    0.407842] ACPI: PCI Interrupt Link [APCF] (IRQs 20 21 22 23) *0
[    0.408025] ACPI: PCI Interrupt Link [APCG] (IRQs 20 21 22 23) *0, disabled.
[    0.408205] ACPI: PCI Interrupt Link [APCH] (IRQs 20 21 22 23) *0
[    0.408387] ACPI: PCI Interrupt Link [APCJ] (IRQs 20 21 22 23) *0
[    0.408577] ACPI: PCI Interrupt Link [APCK] (IRQs 20 21 22 23) *0, disabled.
[    0.408761] ACPI: PCI Interrupt Link [APCS] (IRQs 20 21 22 23) *0
[    0.408946] ACPI: PCI Interrupt Link [APCL] (IRQs 20 21 22 23) *0
[    0.409127] ACPI: PCI Interrupt Link [APCZ] (IRQs 20 21 22 23) *0, disabled.
[    0.409316] ACPI: PCI Interrupt Link [APSI] (IRQs 20 21 22 23) *0
[    0.409510] ACPI: PCI Interrupt Link [APSJ] (IRQs 20 21 22 23) *0
[    0.409705] ACPI: PCI Interrupt Link [APCP] (IRQs 20 21 22 23) *0, disabled.
[    0.409846] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[    0.409848] vgaarb: loaded
[    0.410008] SCSI subsystem initialized
[    0.410143] libata version 3.00 loaded.
[    0.410227] usbcore: registered new interface driver usbfs
[    0.410240] usbcore: registered new interface driver hub
[    0.410270] usbcore: registered new device driver usb
[    0.410435] ACPI: WMI: Mapper loaded
[    0.410437] PCI: Using ACPI for IRQ routing
[    0.410613] NetLabel: Initializing
[    0.410614] NetLabel:  domain hash size = 128
[    0.410616] NetLabel:  protocols = UNLABELED CIPSOv4
[    0.410632] NetLabel:  unlabeled traffic allowed by default
[    0.412698] AppArmor: AppArmor Filesystem Enabled
[    0.412722] pnp: PnP ACPI init
[    0.412749] ACPI: bus type pnp registered
[    0.418553] pnp: PnP ACPI: found 16 devices
[    0.418555] ACPI: ACPI bus type pnp unregistered
[    0.418575] system 00:01: ioport range 0x4000-0x407f has been reserved
[    0.418579] system 00:01: ioport range 0x4080-0x40ff has been reserved
[    0.418582] system 00:01: ioport range 0x4400-0x447f has been reserved
[    0.418585] system 00:01: ioport range 0x4480-0x44ff has been reserved
[    0.418587] system 00:01: ioport range 0x4800-0x487f has been reserved
[    0.418590] system 00:01: ioport range 0x4880-0x48ff has been reserved
[    0.418597] system 00:02: ioport range 0x4d0-0x4d1 has been reserved
[    0.418600] system 00:02: ioport range 0x800-0x87f has been reserved
[    0.418603] system 00:02: ioport range 0x290-0x297 has been reserved
[    0.418612] system 00:0e: iomem range 0xe0000000-0xefffffff has been reserved
[    0.418618] system 00:0f: iomem range 0xf0000-0xf3fff could not be reserved
[    0.418621] system 00:0f: iomem range 0xf4000-0xf7fff could not be reserved
[    0.418625] system 00:0f: iomem range 0xf8000-0xfbfff could not be reserved
[    0.418628] system 00:0f: iomem range 0xfc000-0xfffff could not be reserved
[    0.418631] system 00:0f: iomem range 0x7fff0000-0x7fffffff could not be reserved
[    0.418634] system 00:0f: iomem range 0xffff0000-0xffffffff has been reserved
[    0.418637] system 00:0f: iomem range 0x0-0x9ffff could not be reserved
[    0.418640] system 00:0f: iomem range 0x100000-0x7ffeffff could not be reserved
[    0.418643] system 00:0f: iomem range 0xfec00000-0xfec00fff could not be reserved
[    0.418647] system 00:0f: iomem range 0xfee00000-0xfeefffff has been reserved
[    0.418650] system 00:0f: iomem range 0xfefff000-0xfeffffff has been reserved
[    0.418653] system 00:0f: iomem range 0xfff80000-0xfff80fff has been reserved
[    0.418656] system 00:0f: iomem range 0xfff90000-0xfffbffff has been reserved
[    0.418659] system 00:0f: iomem range 0xfffed000-0xfffeffff has been reserved
[    0.423385] Switching to clocksource acpi_pm
[    0.423758] pci 0000:00:09.0: PCI bridge, secondary bus 0000:05
[    0.423758] pci 0000:00:09.0:  IO window: 0x9000-0xafff
[    0.423758] pci 0000:00:09.0:  MEM window: 0xd3000000-0xd4ffffff
[    0.423758] pci 0000:00:09.0:  PREFETCH window: 0x80000000-0x800fffff
[    0.423758] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:04
[    0.423758] pci 0000:00:0b.0:  IO window: disabled
[    0.423758] pci 0000:00:0b.0:  MEM window: disabled
[    0.423758] pci 0000:00:0b.0:  PREFETCH window: disabled
[    0.423758] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:03
[    0.423758] pci 0000:00:0c.0:  IO window: disabled
[    0.423758] pci 0000:00:0c.0:  MEM window: disabled
[    0.423758] pci 0000:00:0c.0:  PREFETCH window: disabled
[    0.423758] pci 0000:00:0d.0: PCI bridge, secondary bus 0000:02
[    0.423758] pci 0000:00:0d.0:  IO window: disabled
[    0.423758] pci 0000:00:0d.0:  MEM window: 0xd0000000-0xd2ffffff
[    0.423758] pci 0000:00:0d.0:  PREFETCH window: 0x000000c0000000-0x000000cfffffff
[    0.423758] pci 0000:00:0e.0: PCI bridge, secondary bus 0000:01
[    0.423758] pci 0000:00:0e.0:  IO window: disabled
[    0.423758] pci 0000:00:0e.0:  MEM window: disabled
[    0.423758] pci 0000:00:0e.0:  PREFETCH window: disabled
[    0.423758] pci 0000:00:09.0: setting latency timer to 64
[    0.423758] pci 0000:00:0b.0: setting latency timer to 64
[    0.423758] pci 0000:00:0c.0: setting latency timer to 64
[    0.423758] pci 0000:00:0d.0: setting latency timer to 64
[    0.423758] pci 0000:00:0e.0: setting latency timer to 64
[    0.423758] pci_bus 0000:00: resource 0 io:  [0x00-0xffff]
[    0.423758] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffffffffffff]
[    0.423758] pci_bus 0000:05: resource 0 io:  [0x9000-0xafff]
[    0.423758] pci_bus 0000:05: resource 1 mem: [0xd3000000-0xd4ffffff]
[    0.423758] pci_bus 0000:05: resource 2 pref mem [0x80000000-0x800fffff]
[    0.423758] pci_bus 0000:05: resource 3 io:  [0x00-0xffff]
[    0.423758] pci_bus 0000:05: resource 4 mem: [0x000000-0xffffffffffffffff]
[    0.423758] pci_bus 0000:02: resource 1 mem: [0xd0000000-0xd2ffffff]
[    0.423758] pci_bus 0000:02: resource 2 pref mem [0xc0000000-0xcfffffff]
[    0.423758] NET: Registered protocol family 2
[    0.423758] IP route cache hash table entries: 65536 (order: 7, 524288 bytes)
[    0.423758] TCP established hash table entries: 262144 (order: 10, 4194304 bytes)
[    0.424718] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[    0.425515] TCP: Hash tables configured (established 262144 bind 65536)
[    0.425520] TCP reno registered
[    0.425652] NET: Registered protocol family 1
[    0.440102] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440108] pci 0000:00:0b.0: Found disabled HT MSI Mapping
[    0.440116] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440119] pci 0000:00:0b.0: Linking AER extended capability
[    0.440158] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440164] pci 0000:00:0c.0: Found disabled HT MSI Mapping
[    0.440171] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440174] pci 0000:00:0c.0: Linking AER extended capability
[    0.440217] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440222] pci 0000:00:0d.0: Found disabled HT MSI Mapping
[    0.440229] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440232] pci 0000:00:0d.0: Linking AER extended capability
[    0.440279] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440284] pci 0000:00:0e.0: Found disabled HT MSI Mapping
[    0.440292] pci 0000:00:00.0: Found enabled HT MSI Mapping
[    0.440294] pci 0000:00:0e.0: Linking AER extended capability
[    0.440321] pci 0000:02:00.0: Boot video device
[    0.441522] Scanning for low memory corruption every 60 seconds
[    0.441670] audit: initializing netlink socket (disabled)
[    0.441686] type=2000 audit(1290443108.440:1): initialized
[    0.451259] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[    0.452958] VFS: Disk quotas dquot_6.5.2
[    0.453024] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[    0.453788] fuse init (API version 7.13)
[    0.453880] msgmni has been set to 4001
[    0.454163] alg: No test for stdrng (krng)
[    0.454231] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[    0.454234] io scheduler noop registered
[    0.454236] io scheduler anticipatory registered
[    0.454238] io scheduler deadline registered
[    0.454292] io scheduler cfq registered (default)
[    0.454475]  alloc irq_desc for 24 on node 0
[    0.454477]  alloc kstat_irqs on node 0
[    0.454487] pcieport 0000:00:0b.0: irq 24 for MSI/MSI-X
[    0.454493] pcieport 0000:00:0b.0: setting latency timer to 64
[    0.454594]  alloc irq_desc for 25 on node 0
[    0.454596]  alloc kstat_irqs on node 0
[    0.454601] pcieport 0000:00:0c.0: irq 25 for MSI/MSI-X
[    0.454605] pcieport 0000:00:0c.0: setting latency timer to 64
[    0.454704]  alloc irq_desc for 26 on node 0
[    0.454706]  alloc kstat_irqs on node 0
[    0.454712] pcieport 0000:00:0d.0: irq 26 for MSI/MSI-X
[    0.454716] pcieport 0000:00:0d.0: setting latency timer to 64
[    0.454808]  alloc irq_desc for 27 on node 0
[    0.454810]  alloc kstat_irqs on node 0
[    0.454815] pcieport 0000:00:0e.0: irq 27 for MSI/MSI-X
[    0.454820] pcieport 0000:00:0e.0: setting latency timer to 64
[    0.454886] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[    0.454919] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[    0.455043] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0
[    0.455047] ACPI: Power Button [PWRB]
[    0.455113] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1
[    0.455116] ACPI: Power Button [PWRF]
[    0.455172] fan PNP0C0B:00: registered as cooling_device0
[    0.455178] ACPI: Fan [FAN] (on)
[    0.455770] processor LNXCPU:00: registered as cooling_device1
[    0.455814] processor LNXCPU:01: registered as cooling_device2
[    0.460803] thermal LNXTHERM:01: registered as thermal_zone0
[    0.460811] ACPI: Thermal Zone [THRM] (40 C)
[    0.462340] Linux agpgart interface v0.103
[    0.462383] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[    0.462479] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.462782] 00:08: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[    0.463942] brd: module loaded
[    0.464448] loop: module loaded
[    0.464549] input: Macintosh mouse button emulation as /devices/virtual/input/input2
[    0.464869] pata_acpi 0000:00:06.0: setting latency timer to 64
[    0.465375] ACPI: PCI Interrupt Link [APSI] enabled at IRQ 23
[    0.465380]  alloc irq_desc for 23 on node 0
[    0.465383]  alloc kstat_irqs on node 0
[    0.465393] pata_acpi 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.465417] pata_acpi 0000:00:07.0: setting latency timer to 64
[    0.465424] pata_acpi 0000:00:07.0: PCI INT A disabled
[    0.465807] ACPI: PCI Interrupt Link [APSJ] enabled at IRQ 22
[    0.465810]  alloc irq_desc for 22 on node 0
[    0.465812]  alloc kstat_irqs on node 0
[    0.465817] pata_acpi 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    0.465846] pata_acpi 0000:00:08.0: setting latency timer to 64
[    0.465853] pata_acpi 0000:00:08.0: PCI INT A disabled
[    0.466292] Fixed MDIO Bus: probed
[    0.466333] PPP generic driver version 2.4.2
[    0.466388] tun: Universal TUN/TAP device driver, 1.6
[    0.466390] tun: (C) 1999-2004 Max Krasnyansky
[    0.466495] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[    0.466850] ACPI: PCI Interrupt Link [APCL] enabled at IRQ 21
[    0.466854]  alloc irq_desc for 21 on node 0
[    0.466856]  alloc kstat_irqs on node 0
[    0.466864] ehci_hcd 0000:00:02.1: PCI INT B -> Link[APCL] -> GSI 21 (level, low) -> IRQ 21
[    0.466882] ehci_hcd 0000:00:02.1: setting latency timer to 64
[    0.466885] ehci_hcd 0000:00:02.1: EHCI Host Controller
[    0.466926] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1
[    0.466954] ehci_hcd 0000:00:02.1: debug port 1
[    0.466960] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported
[    0.466988] ehci_hcd 0000:00:02.1: irq 21, io mem 0xfeb00000
[    0.480080] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00
[    0.480180] usb usb1: configuration #1 chosen from 1 choice
[    0.480217] hub 1-0:1.0: USB hub found
[    0.480226] hub 1-0:1.0: 10 ports detected
[    0.480319] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[    0.480678] ACPI: PCI Interrupt Link [APCF] enabled at IRQ 20
[    0.480682]  alloc irq_desc for 20 on node 0
[    0.480684]  alloc kstat_irqs on node 0
[    0.480691] ohci_hcd 0000:00:02.0: PCI INT A -> Link[APCF] -> GSI 20 (level, low) -> IRQ 20
[    0.480708] ohci_hcd 0000:00:02.0: setting latency timer to 64
[    0.480711] ohci_hcd 0000:00:02.0: OHCI Host Controller
[    0.480765] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2
[    0.480791] ohci_hcd 0000:00:02.0: irq 20, io mem 0xd5004000
[    0.509671] Freeing initrd memory: 8140k freed
[    0.542110] usb usb2: configuration #1 chosen from 1 choice
[    0.542144] hub 2-0:1.0: USB hub found
[    0.542153] hub 2-0:1.0: 10 ports detected
[    0.542224] uhci_hcd: USB Universal Host Controller Interface driver
[    0.542322] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[    0.545668] serio: i8042 KBD port at 0x60,0x64 irq 1
[    0.545675] serio: i8042 AUX port at 0x60,0x64 irq 12
[    0.545813] mice: PS/2 mouse device common for all mice
[    0.545938] rtc_cmos 00:04: RTC can wake from S4
[    0.545990] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[    0.546012] rtc0: alarms up to one year, y3k, 242 bytes nvram
[    0.546162] device-mapper: uevent: version 1.0.3
[    0.546315] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[    0.546430] device-mapper: multipath: version 1.1.0 loaded
[    0.546434] device-mapper: multipath round-robin: version 1.0.0 loaded
[    0.546678] cpuidle: using governor ladder
[    0.546680] cpuidle: using governor menu
[    0.547104] TCP cubic registered
[    0.547268] NET: Registered protocol family 10
[    0.547791] lo: Disabled Privacy Extensions
[    0.548113] NET: Registered protocol family 17
[    0.548162] powernow-k8: Found 1 AMD Athlon(tm) 64 X2 Dual Core Processor 3800+ processors (2 cpu cores) (version 2.20.00)
[    0.548174] [Firmware Bug]: powernow-k8: No compatible ACPI _PSS objects found.
[    0.548176] [Firmware Bug]: powernow-k8: Try again with latest BIOS.
[    0.548292] PM: Resume from disk failed.
[    0.548306] registered taskstats version 1
[    0.548611]  Magic number: 2:755:439
[    0.548713] rtc_cmos 00:04: setting system clock to 2010-11-22 16:25:09 UTC (1290443109)
[    0.548717] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[    0.548719] EDD information not available.
[    0.548786] Freeing unused kernel memory: 872k freed
[    0.549297] Write protecting the kernel read-only data: 7692k
[    0.561938] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3
[    0.571177] udev: starting version 151
[    0.693544] Floppy drive(s): fd0 is 1.44M
[    0.713427] sata_sil 0000:05:0a.0: version 2.4
[    0.714213] FDC 0 is a post-1991 82077
[    0.714589] ACPI: PCI Interrupt Link [APC4] enabled at IRQ 19
[    0.714598]  alloc irq_desc for 19 on node 0
[    0.714600]  alloc kstat_irqs on node 0
[    0.714611] sata_sil 0000:05:0a.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[    0.714649] sata_sil 0000:05:0a.0: Applying R_ERR on DMA activate FIS errata fix
[    0.715156] pata_amd 0000:00:06.0: version 0.4.1
[    0.715206] pata_amd 0000:00:06.0: setting latency timer to 64
[    0.721054] scsi1 : pata_amd
[    0.721338] scsi0 : sata_sil
[    0.724515] scsi2 : pata_amd
[    0.725317] ata5: PATA max UDMA/133 cmd 0x1f0 ctl 0x3f6 bmdma 0xf000 irq 14
[    0.725320] ata6: PATA max UDMA/133 cmd 0x170 ctl 0x376 bmdma 0xf008 irq 15
[    0.725458] scsi3 : sata_sil
[    0.725549] sata_nv 0000:00:07.0: version 3.5
[    0.725563] sata_nv 0000:00:07.0: PCI INT A -> Link[APSI] -> GSI 23 (level, low) -> IRQ 23
[    0.725622] sata_nv 0000:00:07.0: setting latency timer to 64
[    0.725684] scsi4 : sata_sil
[    0.725749] scsi5 : sata_nv
[    0.725813] scsi6 : sata_sil
[    0.725855] ata1: SATA max UDMA/100 mmio m1024@0xd4008000 tf 0xd4008080 irq 19
[    0.725858] ata2: SATA max UDMA/100 mmio m1024@0xd4008000 tf 0xd40080c0 irq 19
[    0.725862] ata3: SATA max UDMA/100 mmio m1024@0xd4008000 tf 0xd4008280 irq 19
[    0.725865] ata4: SATA max UDMA/100 mmio m1024@0xd4008000 tf 0xd40082c0 irq 19
[    0.725915] scsi7 : sata_nv
[    0.726094] ata7: SATA max UDMA/133 cmd 0x9f0 ctl 0xbf0 bmdma 0xd800 irq 23
[    0.726097] ata8: SATA max UDMA/133 cmd 0x970 ctl 0xb70 bmdma 0xd808 irq 23
[    0.726150] sata_nv 0000:00:08.0: PCI INT A -> Link[APSJ] -> GSI 22 (level, low) -> IRQ 22
[    0.726192] sata_nv 0000:00:08.0: setting latency timer to 64
[    0.726240] scsi8 : sata_nv
[    0.726309] scsi9 : sata_nv
[    0.726492] ata9: SATA max UDMA/133 cmd 0x9e0 ctl 0xbe0 bmdma 0xc400 irq 22
[    0.726495] ata10: SATA max UDMA/133 cmd 0x960 ctl 0xb60 bmdma 0xc408 irq 22
[    0.730383] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[    0.730835] ACPI: PCI Interrupt Link [APC2] enabled at IRQ 17
[    0.730840]  alloc irq_desc for 17 on node 0
[    0.730842]  alloc kstat_irqs on node 0
[    0.730853] skge 0000:05:0c.0: PCI INT A -> Link[APC2] -> GSI 17 (level, low) -> IRQ 17
[    0.730898] skge 1.13 addr 0xd4004000 irq 17 chip Yukon-Lite rev 9
[    0.731629] skge eth0: addr 00:15:f2:55:5b:ab
[    0.731948] ACPI: PCI Interrupt Link [APCH] enabled at IRQ 23
[    0.731952] forcedeth 0000:00:0a.0: PCI INT A -> Link[APCH] -> GSI 23 (level, low) -> IRQ 23
[    0.731956] forcedeth 0000:00:0a.0: setting latency timer to 64
[    0.732003] nv_probe: set workaround bit for reversed mac addr
[    1.050025] ata7: SATA link down (SStatus 0 SControl 300)
[    1.070026] ata1: SATA link down (SStatus 0 SControl 310)
[    1.210030] ata9: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    1.230233] ata9.00: ATA-7: MAXTOR STM3250310AS, 3.AAF, max UDMA/133
[    1.230236] ata9.00: 488397168 sectors, multi 1: LBA48 NCQ (depth 0/32)
[    1.260891] forcedeth 0000:00:0a.0: ifname eth1, PHY OUI 0x5043 @ 9, addr 00:15:f2:55:34:46
[    1.260895] forcedeth 0000:00:0a.0: highdma csum gbit lnktim desc-v3
[    1.270235] ata9.00: configured for UDMA/133
[    1.420030] ata2: SATA link down (SStatus 0 SControl 310)
[    1.770028] ata3: SATA link down (SStatus 0 SControl 310)
[    2.120023] ata4: SATA link down (SStatus 0 SControl 310)
[    2.450017] ata8: SATA link down (SStatus 0 SControl 300)
[    2.450171] scsi 8:0:0:0: Direct-Access    ATA      MAXTOR STM325031 3.AA PQ: 0 ANSI: 5
[    2.450374] sd 8:0:0:0: Attached scsi generic sg0 type 0
[    2.450382] sd 8:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[    2.450504] sd 8:0:0:0: [sda] Write Protect is off
[    2.450507] sd 8:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    2.450534] sd 8:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    2.450712]  sda: sda1 sda2
[    2.489209] sd 8:0:0:0: [sda] Attached SCSI disk
[    2.780024] ata10: SATA link down (SStatus 0 SControl 300)
[    2.784159] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16
[    2.784166]  alloc irq_desc for 16 on node 0
[    2.784169]  alloc kstat_irqs on node 0
[    2.784180] ohci1394 0000:05:0b.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16
[    2.850062] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[16]  MMIO=[d4009000-d40097ff]  Max Packet=[2048]  IR/IT contexts=[4/8]
[    3.109437] EXT4-fs (sda1): mounted filesystem with ordered data mode
[    4.160167] ieee1394: Host added: ID:BUS[0-00:1023]  GUID[0011d800007b6036]
[  12.908507] udev: starting version 151
[  12.998041] Adding 6028280k swap on /dev/sda5.  Priority:-1 extents:1 across:6028280k
[  13.015341] i2c i2c-0: nForce2 SMBus adapter at 0x4c00
[  13.015368] i2c i2c-1: nForce2 SMBus adapter at 0x4c40
[  13.022581] lp: driver loaded but no devices found
[  13.195894] type=1505 audit(1290443122.143:2):  operation="profile_load" pid=664 name="/sbin/dhclient3"
[  13.196179] type=1505 audit(1290443122.143:3):  operation="profile_load" pid=664 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  13.196339] type=1505 audit(1290443122.143:4):  operation="profile_load" pid=664 name="/usr/lib/connman/scripts/dhclient-script"
[  13.241334] EDAC MC: Ver: 2.1.0 Oct 16 2010
[  13.253921] [drm] Initialized drm 1.1.0 20060810
[  13.284738] parport_pc 00:09: reported by Plug and Play ACPI
[  13.284790] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[  13.290861] EDAC amd64_edac:  Ver: 3.2.0 Oct 16 2010
[  13.294419] EDAC amd64: This node reports that Memory ECC is currently disabled, set F3x44[22] (0000:00:18.3).
[  13.294435] EDAC amd64: ECC disabled in the BIOS or no ECC capability, module will not load.
[  13.294437]  Either enable ECC checking or force module loading by setting 'ecc_enable_override'.
[  13.294438]  (Note that use of the override may cause unknown side effects.)
[  13.294467] amd64_edac: probe of 0000:00:18.2 failed with error -22
[  13.325906] nouveau 0000:02:00.0: PCI INT A -> Link[APC4] -> GSI 19 (level, low) -> IRQ 19
[  13.325913] nouveau 0000:02:00.0: setting latency timer to 64
[  13.333138] ppdev: user-space parallel port driver
[  13.333432] [drm] nouveau 0000:02:00.0: Detected an NV40 generation card (0x042000a1)
[  13.333760] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PROM
[  13.333775] [drm] nouveau 0000:02:00.0: ... BIOS signature not found
[  13.333777] [drm] nouveau 0000:02:00.0: Attempting to load BIOS image from PRAMIN
[  13.383877] [drm] nouveau 0000:02:00.0: ... appears to be valid
[  13.383882] [drm] nouveau 0000:02:00.0: BIT BIOS found
[  13.383885] [drm] nouveau 0000:02:00.0: Bios version 05.41.02.49
[  13.383888] [drm] nouveau 0000:02:00.0: BIT table 'd' not found
[  13.383891] [drm] nouveau 0000:02:00.0: Found Display Configuration Block version 3.0
[  13.383895] [drm] nouveau 0000:02:00.0: DCB connector table: VHER 0x30 5 7 2
[  13.383899] [drm] nouveau 0000:02:00.0:  0: 0x00001030: type 0x30 idx 0 tag 0x07
[  13.383902] [drm] nouveau 0000:02:00.0:  1: 0x00000100: type 0x00 idx 1 tag 0xff
[  13.383905] [drm] nouveau 0000:02:00.0:  2: 0x00000210: type 0x10 idx 2 tag 0xff
[  13.383908] [drm] nouveau 0000:02:00.0:  3: 0x00000211: type 0x11 idx 2 tag 0xff
[  13.383911] [drm] nouveau 0000:02:00.0:  4: 0x00000213: type 0x13 idx 2 tag 0xff
[  13.383914] [drm] nouveau 0000:02:00.0: Raw DCB entry 0: 01000300 00000028
[  13.383917] [drm] nouveau 0000:02:00.0: Raw DCB entry 1: 01000302 00000000
[  13.383920] [drm] nouveau 0000:02:00.0: Raw DCB entry 2: 04011310 00000028
[  13.383923] [drm] nouveau 0000:02:00.0: Raw DCB entry 3: 020223f1 0040c083
[  13.383930] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 0 at offset 0xDDF7
[  13.384231] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 1 at offset 0xE2C4
[  13.384495] lp0: using parport0 (interrupt-driven).
[  13.432361] gameport: NS558 PnP Gameport is pnp00:0d/gameport0, io 0x201, speed 898kHz
[  13.473829] logips2pp: Detected unknown logitech mouse model 115
[  13.570234] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 2 at offset 0xE7A3
[  13.570256] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 3 at offset 0xE91A
[  13.630026] [drm] nouveau 0000:02:00.0: Parsing VBIOS init table 4 at offset 0xE9EE
[  13.635621] [TTM] Zone  kernel: Available graphics memory: 1029000 kiB.
[  13.635638] [drm] nouveau 0000:02:00.0: 256 MiB VRAM
[  13.636480] [drm] nouveau 0000:02:00.0: 64 MiB GART (aperture)
[  13.636941] [drm] nouveau 0000:02:00.0: Allocating FIFO number 0
[  13.637834] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 0
[  13.637842] [drm] nouveau 0000:02:00.0: Initial CRTC_OWNER is 0
[  13.637848] [drm] nouveau 0000:02:00.0: Saving VGA fonts
[  13.689222] [drm] nouveau 0000:02:00.0: Detected a DVI-I connector
[  13.689561] [drm] nouveau 0000:02:00.0: Detected a VGA connector
[  13.689750] [drm] nouveau 0000:02:00.0: Detected a TV connector
[  13.691027] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 0)
[  13.691031] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on tmds encoder (output 1)
[  13.691035] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on vga encoder (output 2)
[  13.691038] [drm] nouveau 0000:02:00.0: Setting dpms mode 3 on TV encoder (output 3)
[  13.825911] ACPI: PCI Interrupt Link [APCJ] enabled at IRQ 22
[  13.825920] Intel ICH 0000:00:04.0: PCI INT A -> Link[APCJ] -> GSI 22 (level, low) -> IRQ 22
[  13.825960] Intel ICH 0000:00:04.0: setting latency timer to 64
[  13.837772] skge eth0: enabling interface
[  13.841404] ADDRCONF(NETDEV_UP): eth0: link is not ready
[  13.860614] eth1: no link during initialization.
[  13.862128] ADDRCONF(NETDEV_UP): eth1: link is not ready
[  13.874192] type=1505 audit(1290443122.821:5):  operation="profile_load" pid=871 name="/usr/share/gdm/guest-session/Xsession"
[  13.876136] type=1505 audit(1290443122.821:6):  operation="profile_replace" pid=872 name="/sbin/dhclient3"
[  13.876432] type=1505 audit(1290443122.821:7):  operation="profile_replace" pid=872 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[  13.876600] type=1505 audit(1290443122.821:8):  operation="profile_replace" pid=872 name="/usr/lib/connman/scripts/dhclient-script"
[  13.880822] type=1505 audit(1290443122.831:9):  operation="profile_load" pid=873 name="/usr/bin/evince"
[  13.886036] type=1505 audit(1290443122.831:10):  operation="profile_load" pid=873 name="/usr/bin/evince-previewer"
[  13.888407] type=1505 audit(1290443122.831:11):  operation="profile_load" pid=873 name="/usr/bin/evince-thumbnailer"
[  13.986925] input: ImExPS/2 Logitech Explorer Mouse as /devices/platform/i8042/serio1/input/input4
[  14.010280] [drm] nouveau 0000:02:00.0: allocated 1280x1024 fb: 0x49000, bo ffff88006ce8b400
[  14.010398] fb0: nouveaufb frame buffer device
[  14.010400] registered panic notifier
[  14.010411] [drm] Initialized nouveau 0.0.15 20090420 for 0000:02:00.0 on minor 0
[  14.012729] vga16fb: initializing
[  14.012735] vga16fb: mapped to 0xffff8800000a0000
[  14.012742] vga16fb: not registering due to another framebuffer present
[  14.035938] [drm] nouveau 0000:02:00.0: Setting dpms mode 0 on vga encoder (output 2)
[  14.035944] [drm] nouveau 0000:02:00.0: Output VGA-1 is running on CRTC 0 using output C
[  14.042981] Console: switching to colour frame buffer device 160x64
[  14.160055] intel8x0_measure_ac97_clock: measured 50455 usecs (2480 samples)
[  14.160059] intel8x0: clocking to 46875
[  15.191780] [drm] nouveau 0000:02:00.0: Allocating FIFO number 1
[  15.192675] [drm] nouveau 0000:02:00.0: nouveau_channel_alloc: initialised FIFO 1
[  15.727594] skge eth0: Link is up at 100 Mbps, full duplex, flow control both
[  15.728061] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[  26.360018] eth0: no IPv6 routers present
patrice@patrice-desktop:~$

Avatar du membre
Elgrande71
Administrateur
Administrateur
Messages : 1745
Enregistré le : 29 février 2008, 10:24
Localisation : Le Creusot
Contact :

Re : Config pou partage de calcul

Message par Elgrande71 » 22 novembre 2010, 17:51

Ouais, bien bizarre ce truc.
Et ton message d'incompatibilité de logiciel te dit quoi exactement ?
Modifié en dernier par Elgrande71 le 22 novembre 2010, 17:56, modifié 1 fois.
Debian - Distribution GNU/Linux de référence
Parabola GNU/Linux - Distribution GNU/Linux Libre
Solus

Patoche
Zone privée MT Libristes
Zone privée MT Libristes
Messages : 51
Enregistré le : 26 septembre 2010, 15:14
Localisation : Montagne(33)
Contact :

Re : Config pou partage de calcul

Message par Patoche » 22 novembre 2010, 20:03

bon,ben.....il semblerait que ça fonctionne!
On peut utiliser le gpu pour les projets World community Grid?

Avatar du membre
Elgrande71
Administrateur
Administrateur
Messages : 1745
Enregistré le : 29 février 2008, 10:24
Localisation : Le Creusot
Contact :

Re : Re : Config pou partage de calcul

Message par Elgrande71 » 22 novembre 2010, 20:24

Patoche a écrit : bon,ben.....il semblerait que ça fonctionne!
On peut utiliser le gpu pour les projets World community Grid?
Tant mieux si ton PC est revenu à son fonctionnement d'avant.
Sinon pour répondre, il ne me semble pas pour l'instant que World Community Grid est des projets qui utilisent le GPU.
Debian - Distribution GNU/Linux de référence
Parabola GNU/Linux - Distribution GNU/Linux Libre
Solus

Répondre